☰
Major Configurations | Content | Brand |
Laser Generator | IPG 4000W | IPG China |
Laser Cutting Head | Auto Focus | Precitec LightCutter |
Height Controller | Causative transducer | BOCHU, China |
CNC Controller | Cypcut | |
Professional Laser Cutting Software | Fscut | |
Speed Reducer | SHIMPO | SHIMPO, Japan |
Rack and Pinion | YYC | YYC, Taiwan |
Linear Guide | TBI | TBI, Taiwan |
Proportional Valve | SMC | SMC, Japan |
X/Y/Z Drag Chain | IGUS | IGUS, Germany |
Shield Cover | Domestic | Cangzhou, China |
Industrial Water Chiller | Domestic | Tongfei, China |
Industrial PC and LCD Screen | Domestic | BOCHU, China |
Voltage Stabilizer | Domestic | XiShun, China |
Double Servo driver system | Yaskawa | Yaskawa, Japan |
Technical spec | Standard Data |
Total weight | 5T |
Total Power | 29KW |
Laser Type | Fiber laser |
Maximum Cutting Thickness | 20MM Mild steel, 16MM Stainless steel,12 MM Aluminum |
Effective Cutting size | 1530MMx3050MM |
X.Y Axis Drive system | Rack and Pinion mode, Japan Yaskawa Servo system X 1.3KW Y1 Y2 1.8KW |
Laser cutting head Drive System | Ball screw mode, Japan Yaskawa servo system 400W |
Laser cutting head lifting distance | 130MM |
Maximum rapid X, Y Axis Speed | 100m/min |
Maximum Acceleration X, Y Axis Speed | 1.2G |
Position Accuracy | 0.02mm/M |
Repeat Accuracy | 0.03mm/M |
Cooling Style | Recycling water |
Max loading weight of cutting table | 1000KG |
Assistant Gas | Oxygen/Nitrogen/Compressor Air |
Continuous Working Time | 24 Hrs |
Sub item | Item | Requirements | Notes |
Power | Laser Source | 14KW | The total installed capacity is not less than 29KW, And this machine need very good ground line.
|
Chiller | 4.8KW | ||
Machine Servo System | 5.3KW | ||
Dust blower Motor | 3.8KW | ||
Other accessories | 1KW | ||
Stability of 3-phase power | 380V±5% | ||
Instability of 3-phase power | <2.5% | ||
Earthing | <4Ohm | ||
Water | Water for Chiller | Distilled water without minerals | Change every month |
Gas |
Cutting Gas | N2>99.5% | The processing parameters |
O2>99.5% | |||
Air pressure should not less than 1MPA | |||
Working |
Temperature requirements |
5-40 Degree | |
Humidity requirements | Less than 70% | ||
Foundation requirement |
There should be no vibration source nearby | If there is a vibration source on site or nearby, the user is required to dig an anti-vibration trench around the foundation | |
Work piece | For CS and SS: quality surface and no rust | ||
Technical spec | Standard Data |
Total weight | 5T |
Total Power | 29KW |
Laser Type | Fiber laser |
Maximum Cutting Thickness | 20MM Mild steel, 16MM Stainless steel,12 MM Aluminum |
Effective Cutting size | 1530MMx3050MM |
X.Y Axis Drive system | Rack and Pinion mode, Japan Yaskawa Servo system X 1.3KW Y1 Y2 1.8KW |
Laser cutting head Drive System | Ball screw mode, Japan Yaskawa servo system 400W |
Laser cutting head lifting distance | 130MM |
Fully closed large enclosure design Fully closed design, laser radiation protection glass viewing window. The upper and lower dual-channel dust removal system reflects the concept of green environmental protection technology. Real-time intelligent monitoring system ensures production safety. |
Double chain fast switching system Double chain drive exchange system with high precision and stability. Greatly improved the efficiency of the worktable exchange drive, compared to the traditional single chain drive mode. All aspects of performance have been significantly improved, the fastest implementation of 10S platform exchange. |
A new generation of cutting collision avoidance system The perfect fit between the laser head and the software, the high capacitance is sensitive. In the cutting process, there are obstacle recognition and automatic avoidance functions. Reduce the risk of laser head collision and achieve zero collision cutting. |
Training plan 1:
S.N. | Item | Content | |
1 | Time | Before machine delivery | |
2 | Location | Manufacturer factory | |
3 | Training | ① Maintenance ：Routine maintenance, lubrication, assembling and | |
contents | disassembling lens; | ||
② Operation：Equipment operation and basic trouble shooting; | |||
③ Programming：the machine tool programming, transfer operations | |||
of programming procedures, the use of programming software and so | |||
on; | |||
Training plan 2:
S.N. | Item | Contents | Notes |
1 | Time | Carried out simultaneously with the commissioning on customer's site | |
2 | Location | Customer's installation site | |
3 | Training contents | Participate in the whole process of installation and commissioning. Please refer to the Customer Training Program for other information |
If you want, you can come to ADM company to visit or contact us at any time
DemonMao
Phone number：+86 18240166849
WhatsApp:+86 18240166849
WeChat: mhy2205970710
E-mail:demonmao@admlaser.cn
Skype:2205970710@qq.com
Facebook:Haiyan Mao
